Sometimes there's nothing worse than trying to boot up your PC only to be greeted by a series of mysterious beeps. Though if your motherboard is dead , all bets are off. Sometimes it's as simple as improperly seated RAM. Whatever the case, the codes are there to let you know that something is wrong so you can get on your way to diagnosing and fixing the problem.
It's important to note that the motherboard maker is not necessarily the same as the BIOS maker, so it's best to consult your manual as the codes can vary. And, unfortunately, there isn't a standardized beep code regardless of what BIOS firmware is in your machine. But here's a general idea of how you can figure out what beep code your computer is making when it tries to POST.
If everything checks out, your computer will load into Windows without issue. If the computer is no functional while making the noise, press and hold the power button until it shuts down. After forcing a shutdown, remove your power cord and the battery, and then wait for a full two minutes. Return the power and test the computer. If the noise persists, you have a potentially serious problem to address. If the computer is beeping on startup, without any hesitation, the issue is most likely a hardware and memory problem.
As a last ditch effort, always check the battery level or make sure that your computer is securely connected to a power source. Press all the plugs to snug everything up if needed. A loose power connection can drain the battery and many computer making beeping noises are only a warning that power is lost and a shutdown is looming. If the power is solid and the battery is charged up, move on to more intensive troubleshooting processes. With any luck, the problem is resolved by snugging up your power cord.
Although a long beep can mean you have hardware issues, this doesn't necessarily mean that your hardware has gone bad. It could simply mean that it is loose or not seated correctly. Next, you'll need to figure out what company manufactured the BIOS chip that's on your computer motherboard.
Unfortunately, the computer industry never agreed on a uniform way to communicate with beeps, so it's important to get this right. The easiest way to figure this is out is by installing one of these free system information tools , which should tell you if your BIOS is made by AMI, Award, Phoenix, or another company. If that doesn't work, you could open your computer and take a peek at the actual BIOS chip on your computer motherboard, which should have the company name printed on or next to it.
Your computer maker isn't the same as the BIOS maker and your motherboard maker isn't necessarily the same as the BIOS maker, so don't assume you already know the right answer to this question. Now that you know the BIOS manufacturer, choose the troubleshooting guide below based on that information:.
Using the beep code information specific to those BIOS makers in those articles, you'll be able to figure out exactly what's wrong that's causing the beeping, be it a RAM issue, a video card problem, or some other hardware problem. Some computers, even though they may have BIOS firmware made by a particular company, like AMI or Award, further customize their beep-to-problem language, making this process a little frustrating.
If you think this might be the case, or just worried it could be, almost every computer maker publishes their beep code list in their user guides, which you can probably find online. See How to Find Tech Support Information if you need some help digging up your computer's manual online. Actively scan device characteristics for identification.
Use precise geolocation data. Select personalised content. Create a personalised content profile. Measure ad performance. Select basic ads. Create a personalised ads profile. Select personalised ads. Apply market research to generate audience insights.
Measure content performance. Develop and improve products.
0コメント