This rate is within the storm control limit of Kbps. A traffic generator that can send broadcast and unknown unicast traffic at a rate that exceeds Kbps. The topology used consists of two routers that could be connected to various network devices.
If the combined traffic exceeds this level, the router drops packets for the controlled traffic types to prevent a network outage. Starting in Junos OS release This example excludes multicast traffic from the storm traffic. Many protocols use multicast for control traffic, and for that reason network administrators and operators may want to keep multicast working to avoid obstructing protocol operation. To quickly configure storm control based on the traffic rate in Kbps of the combined traffic streams, copy the following commands and paste them into the terminal window.
The configurations of routers R1 and R2 are exactly the same:. Configure a storm control profile, sc , and specify the traffic rate in Kbps of the combined traffic streams. Exclude multicast traffic from the storm control profile.
Bind the storm control profile sc to a logical interface. Remember to do this for both interfaces between the routers. Do this for both interfaces between the routers. From Host A to Host B, use a traffic generator to send broadcast and unknown unicast traffic at a rate that exceeds Kbps.
The Input bytes field shows the ingress traffic rate in bytes per second bps. The input rate is within the storm control limit of Kbps. After the timeout period of seconds 2 minutes , verify that the interface comes back up. Help us improve your experience. On ProCurve Switches you have multiple options to prevent loops and therefore boradcast storm: 1. Honored Contributor.
Thank you for your answer guys. The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation. End of content United States. Hewlett Packard Enterprise International.
The broadcast storm is one of the major deficiencies in computer network systems and it can shut down entire network in seconds. A broadcast storm can overwhelm switches and endpoints as they struggle to keep up with processing the flood of packets. In LAN, it is common that the switches are interconnected for redundancy. At this time, a serious network problem can occur, which is known as broadcast storm. A broadcast originating from a device connected to any switch, can cause the circulation of broadcasts around the network and can saturate the network consuming all available bandwidth.
Broadcast storms consume entire bandwidth and deny bandwidth for normal network traffic. Source: www. The loop created will catch all frames passing by, keeping them in the loop.
0コメント